Based on 0 reviews
Be the first to review “Three Quarters 35 x 20Kg Sika Setting Sand”
You must be logged in to post a review.
No products in the cart.
You must be logged in to post a review.
This natural blue chipping is sourced from Welsh Quarries that produce roof tiles. Ideal for paths and ground covering, this product also works well as a mulch for planting beds.
Sika Setting Sand is an easy to use, moisture curing jointing material for all types of paving having joint widths of 2-5 mm. Sika Setting Sand is suitable for all types of block paving and can be used in areas subject to light vehicular traffic.
Triple Action takes care of remedial wood treatment and preservation in one can. It is specially designed to deeply penetrate all wood and joinery to give lasting protection from damage caused by wet rot, dry rot, fungi and wood boring insects/larvae.
RonaScreed FastDry Prompt screeding additive for site batched screeds is used to quickly reduce the level of retained moisture within the screed allowing floor coverings to be laid over the screed much sooner than with conventional screeds. It gains strength quickly, permitting early access by following trades.
It is supplied in concentrated form and used in low dilution. It promotes rapid drying and early laying of floor coverings such as sheet vinyl, tiles and other non pervious floor coverings.
Drying of screeds incorporating RonaScreed FastDry Prompt is influenced by heat generated during curing, meaning drying of thicker screeds is faster per millimetre of screed thickness. Screeds installed at 50mm can accept moisture sensitive floor coverings after only 4 days, 75mm and 100mm screeds can accept the same coverings after only 6 days.
RonaScreed FastDry Prompt is typically incorporated within 25mm to 100mm thick floor screeds and applied by competent screeding contractors. It is simple and straightforward to use and can be purchased and laid by non-licensed screeding contractors.
There are no reviews yet.