Based on 0 reviews
Be the first to review “Three-Quarters 30 x 22.5Kg PROJOINT TITAN – NEUTRAL”
You must be logged in to post a review.
No products in the cart.
You must be logged in to post a review.
RonaScreed FastDry Prompt screeding additive for site batched screeds is used to quickly reduce the level of retained moisture within the screed allowing floor coverings to be laid over the screed much sooner than with conventional screeds. It gains strength quickly, permitting early access by following trades.
It is supplied in concentrated form and used in low dilution. It promotes rapid drying and early laying of floor coverings such as sheet vinyl, tiles and other non pervious floor coverings.
Drying of screeds incorporating RonaScreed FastDry Prompt is influenced by heat generated during curing, meaning drying of thicker screeds is faster per millimetre of screed thickness. Screeds installed at 50mm can accept moisture sensitive floor coverings after only 4 days, 75mm and 100mm screeds can accept the same coverings after only 6 days.
RonaScreed FastDry Prompt is typically incorporated within 25mm to 100mm thick floor screeds and applied by competent screeding contractors. It is simple and straightforward to use and can be purchased and laid by non-licensed screeding contractors.
The quick and simple way to fill the spaces between setts, slabs of concrete paving, natural stone, and block paving. ProJoint Polysweep’s exceptional strength, when cured, leaves a durable joint that is resistant to frost, weed, and pressure washers. The formulation is stain-free thanks to our clear set technology, making it ideal for do-it-yourselfers as well as professionals.
EVERBUILD JETCEM PREMIX SAND & CEMENT is a specially formulated rapid setting cement based patching/repair compound which when mixed with water sets in about 30 minutes.
Everbuild Jetcem Rapid Repair Cement is a cement-based product that is easy to use and sets in approximately 30 minutes.
There are no reviews yet.