All Our Landscaping Supplies Deals Come With ** FREE DELIVERY **
,

Sika Block Paving Seal 5L and 25L – Pallet Deals and Bulk Buy


Sika Block Paving Seal

A clear resin for impregnating, enhancing and sealing block paving

Sika Block Paving Seal is a low odour clear resin which impregnates and seals block paving, improving the overall appearance of the block paving with a matt finish.

  • Simple and quick to apply
  • Enhances appearance
  • Matt finish
  • Easier to clean and maintain
  • Improves wear resistance

Uses

  • Sika Block Paving Seal may be used for both vehicle and pedestrian areas.
  • New and existing drives, forecourts, parking areas, walkways and paths can all be treated.

Spotted a pallet deal cheaper than ours? We can usually beat it! 0333 344 2655 or info@bulkbuylandscaping.co.uk
~ FREE DELIVERY on Feb / Everbuild / Sika is 2 - 5 working days ~

Sika Block Paving Seal further information

Consumption:

As a guide Sika Block Paving Seal will treat up to 5-8m2 per litre. Coverage will depend on surface finish, permeability and profile of block pavers.

Sika Block Paving Seal product information

Packaging5ltr and 25ltr metal tin
Appearance / ColourClear
Shelf Life12 months if stored in original, tightly closed containers
Storage ConditionsProtect from frost and store between 5°C and 25°C.
Density~ 0.9 kg/I (at +20°C)
Substrate temperatureFoot trafficFull cure
+10 °C~ 16 hours ~ 24 hours
+20 °C~ 8 hours~ 20 hours
+30 °C~ 6 hours ~ 16 hours
Times are approximate and will be affected by changing substrate and am- bient conditions, particularly temperature and relative humidity.

Application Instructions

SUBSTRATE QUALITY / PRE-TREATMENT
  • For new block paving areas, remove all loose materials by brush or vacuum.
  • Ensure the joints are filled with compacted Sika Setting Sand or kiln dried sand before treating with Sika Block Paving Seal.
  • For existing block paved areas remove all traces of weeds, algae and lichens with Sika Mould Buster.
  • Remove oil, grease and diesel stains.
  • Ensure all areas are completely dry before applying Sika Block Paving Seal.
  • To ensure the paving is completely dry, scrape out some jointing sand to a depth of up to 10mm. If the sand is dry then the blocks may be treated.
APPLICATION
  • Mix thoroughly before use.
  • Treat the perimeter of the block paving area first.
  • Apply the first coat by roller, spreading liberally and uniformly, making sure the Sika Block Paving Seal does not puddle.
  • During application always ensure a wet edge is maintained to avoid a striping effect.
  • Repeat the process leaving a maximum of 24 hours between coats.
  • Apply the second coat at right angles to the first.
  • Do not over-apply.
  • Allow at least 6 hours before pedestrian traffic and 24 hours for vehicle.
  • Protect from moisture during curing.
  • It is always recommended that a trial area be treated to ascertain an accurate measure of consumption and to ensure the finished appearance is acceptable.
Sika Block Paving Seal CLEANING OF TOOLS
  • Clean all tools and application equipment with white spirits immediately after use. Hardened/cured material can only be removed mechanically.
LIMITATIONS
  • In hot weather (above +25°C) store Sika Block Paving Seal in a cool place prior to use.
  • In low temperatures (below +5 oC) the product may thicken and be difficult to spray.
  • Sika Block Paving Seal must be removed prior to the application of a coating system
  • Sika Block Paving Seal will gradually degrade and be removed by environmental exposure and trafficking.
  • Do not use sprayers, which have been used to spray silicones or release agents.
  • Do not mix differing formulations of Sika or other curing membranes
  • Ensure spraying equipment is cleaned thoroughly before use and residues of previous membranes are removed.
Brands

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Sika Block Paving Seal 5L and 25L – Pallet Deals and Bulk Buy”

There are no reviews yet.