ProJoint Fusion All Weather extended information
Coverage:
Joint size | 600 x 600mm slabs | Four size Indian (600mm series) | 100 x 100mm setts |
---|---|---|---|
5mm x 25mm | 20m2 | 17.2m2 | 3.33m2 |
10mm x 25mm | 10m2 | 8.6m2 | 1.67m2 |
15mm x 25mm | 6.67m2 | 5.7m2 | 1.11m2 |
ProJoint Fusion is a very quick and easy paving joint filler designed for areas of pedestrian paving. For vehicle trafficked areas use one of our two-part epoxy systems such as ProJoint MAX or ProJoint V75-WT.
Preparation:
Ensure the surface of the paving is clean prior to application. Check the joints are cleaned out to a depth of 25mm observing a minimum joint width of 3mm, and that the paving is firmly bedded and stable prior to filling joints.
Paving should be laid on a permeable bedding mix as ProJoint Fusion cures when it dries out so water/rain must have a route of escape.
ProJoint Fusion Application:
- Apply ProJoint Fusion when surface temperature is between 3°C and 25°C.
- Liberally soak the paving.
- Empty the mix evenly onto the surface and work quickly into the joints using a brush or squeegee.
- Mist the surface and compound with a soft spray of water to flush the material down into the joints. Top up any low joints and repeat as necessary.
- Once the water has drained away, sweep the paving with a fresh soft brush at 45° to the joints, and remove any excess. A trowel or iron can be used to achieve a traditional finish if required.
This product can be used in light rain but prolonged and heavy rain will delay 4 the curing process and increase the risk of fluid damage.
Cure times are dependent on temperature and humidity, but as a guide can accept foot traffic after 12 hours. Please note that cold temperatures and wet weather can delay the curing time significantly.
PLEASE NOTE: ProJoint Fusion is not designed for porcelain paving – if you are planning on using porcelain paving, please refer to our ProJoint Porcelain Primer and Grout.
ProJoint Fusion may highlight and enhance the natural surface colours and textures of the paving – this can be especially noticeable on grey paving, including granite, so a test area is advised before use. It is important to spread the mix across the total paving area to ensure the potential effect is uniform. Please note that this is a temporary effect therefore general weathering and foot traffic will accelerate its disappearance.
There are no reviews yet.