Based on 0 reviews
Be the first to review “Half Pallet 20 x 22.5Kg PROJOINT TITAN – BASALT”
You must be logged in to post a review.
No products in the cart.
You must be logged in to post a review.
RonaScreed FastDry Prompt screeding additive for site batched screeds is used to quickly reduce the level of retained moisture within the screed allowing floor coverings to be laid over the screed much sooner than with conventional screeds. It gains strength quickly, permitting early access by following trades.
It is supplied in concentrated form and used in low dilution. It promotes rapid drying and early laying of floor coverings such as sheet vinyl, tiles and other non pervious floor coverings.
Drying of screeds incorporating RonaScreed FastDry Prompt is influenced by heat generated during curing, meaning drying of thicker screeds is faster per millimetre of screed thickness. Screeds installed at 50mm can accept moisture sensitive floor coverings after only 4 days, 75mm and 100mm screeds can accept the same coverings after only 6 days.
RonaScreed FastDry Prompt is typically incorporated within 25mm to 100mm thick floor screeds and applied by competent screeding contractors. It is simple and straightforward to use and can be purchased and laid by non-licensed screeding contractors.
The ProJoint Porcelain Primer is an ultra-high polymer and fibre modified flexible primer with excellent workability and adhesion properties. As a single coat fast application, ProJoint Porcelain Primer promotes adhesion and control suction on difficult substrates such as porcelain, concrete, ceramic tiles, paving slabs or setts. Using the ProJoint Porcelain Primer enables the porcelain slabs or setts to be laid on a sand and cement bedding.
The powdered primer is supplied in two 10kg bags to allow the bucket to act as the ideal mixing vessel with the simple addition of water.
We recommend this primer be used prior to laying porcelain paving and using the ProJoint Porcelain Grout
Meadow View Berwyn Green Granite Chipping is a rich green angular granite chipping with flecks of white that blends well into natural landscaping projects. It also deepens in colour when wet, making it really stand out when used for water features.
ProJoint TITAN, like ProJoint Fusion, provides a fast and simple way to fill joints between setts and paving slabs in locations with both general foot activity and vehicular access.
It’s is an easy-to-use, high-strength two-part epoxy paving grout that works well with both natural stone and concrete pavers. The tub is pre-mixed with sand and resin; all that’s needed to initiate the chemical cure is the addition of the contained hardener. ProJoint TITAN provides a frost-resistant, weed-free joint that is resistant to pressure washing after it has set.
There are no reviews yet.