All Our Landscaping Supplies Deals Come With ** FREE DELIVERY **
,

Everbuild 901 ‘Black Jack’ Black Bitumen Paint – Pallet Deals and Bulk Buy


Everbuild 901 Black Jack Black Bitumen Paint

Solvent-based, full-bodied black bitumen paint for metal protection

  • Fast drying paint
  • Suitable for use on most common building surfaces
  • Resistant to most salt solutions, dilute acids and alkalis, water and alcohol
  • Provides a waterproof, weatherproof and corrosion-resistant protective coating for all metal conjugated iron sheets, gutters, and railings
  • For overcoating felt and protecting common building surfaces

Spotted a pallet deal cheaper than ours? We can usually beat it! 0333 344 2655 or info@bulkbuylandscaping.co.uk
~ FREE DELIVERY on Feb / Everbuild / Sika is 2 - 5 working days ~

* Box of products need to have a pallet, 1/2 or 3/4 of any Sika / Everbuild / Feb in your order to checkout. (it's how we do free delivery)

£78.90£2,193.90 +VAT

£78.90 +VAT
£1,106.90 +VAT
£1,660.00 +VAT
£2,193.90 +VAT
x

Everbuild 901 Black Bitumen Paint extended information

EVERBUILD® BLACK JACK® 901 BLACK BITUMEN PAINT is a solvent-based, full-bodied black bituminous paint. When dry, the product forms an odourless and taint-free black film suitable for metal protection as well as overcoating wood and felt.

USES

It provides an effective waterproof, weatherproof, corrosion-resistant protective coating. It is resistant to low concentrations of alkalis and acids and can withstand prolonged oxidation. It is suitable for application to a wide variety of materials including iron, steel, lead, zinc, aluminium, asbestos-cement, concrete, stone, wood, felt and brick and is mainly used for:

  • Metal protection – corrugated iron sheets, fire es-capes, stairways, ladders, storage tanks, gutters, downpipes, fences, railings, gates etc
  • As a protective coating for concrete structures, stone, brick, concrete screeds and sand/cement surfaces.
  • Overcoating felt/wood.

CHARACTERISTICS / ADVANTAGES

  • Fast drying.
  • For use on most common building surfaces.
Type of SolventWhite spirit
Flashpointca. 40°C
Film Thickness Per Coat @ 11m2 / LtrWet - 0.1mm
Dry -0.05mm
Chemical And Water ResistanceResistant to: most salt solutions, dilute acids and alkalis, water and alcohol.
Not resistant to: oils, solvents and some detergent solutions
Service Temps-20°C to +50°C

Everbuild 901 Black Bitumen Paint product information

Chemical BaseSolvent-based bitumen
Packaging1L, 2.5L, 5L and 25L tins
ColourBlack
Shelf Life24 months from date of manufacture in tightly sealed, undamaged contain-
ers.
Storage ConditionsEVERBUILD BLACK JACK 901 BLACK BITUMEN PAINT contains a flamable solvent, and all normal precautions against fire must be taken during both storage and use. Store in original container in cool (5°C - 25°C) dry
conditions. Keep away from sources of ignition.
Densityca. 0.9 g/cm3 at 20°C
Viscosity700-1200 cP

Everbuild 901 Black Bitumen Paint technical information

Service Temperature-20°C to +50°C

Everbuild 901 Black Bitumen Paint application information

Yield
Consumption / Yield / Dosage (PRINT single line)Porous surfaces: 4-6m2
Non-porous surfaces: 11m2
Ambient Air Temperature5°C - 40°C. Surfaces must be free from ice and water
Drying time4-6 hours depending on drying conditions

EVERBUILD 901 BLACK BITUMEN PAINT SUBSTRATE PREPARATION

As with all surface coatings, preparation of the surface is of great importance and will influence the degree of adhesion obtained and the life of the coating. All faces must be sound, stable and thoroughly clean and dry. Metal surfaces should be wire-brushed to remove rust. Where long-term protection is required an initial treatment of a rust-inhibitive product such as red lead or zinc phosphate should be used. Loose or blistered paint should be removed, as should tar-based paint systems. New galvanised surfaces should be roughened with a wire brush or treated with a etary etch primer. Porous surfaces should be primed with Black Jack Bitumen & Flashing Primer.

APPLICATION

EVERBUILD® BLACK JACK® 901 BLACK BITUMEN PAINT is ready for use and should not be thinned. Stir thoroughly before use. Apply by brush or spray.

A minimum of two coats of EVERBUILD BLACK JACK 901 BLACK BITUMEN PAINT should be applied. The first coat should be allowed to dry (normally 2-4 hours depending on weather conditions) before the second coat is applied. Protective coating on concrete, etc: and some stone surfaces may be porous, an initial since concrete primer coat of EVERBUILD BITUMEN PRIMER should be applied.

EVERBUILD 901 BLACK BITUMEN PAINT – LIMITATIONS

  • Do not use for potable drinking water tanks.
  • Avoid inhalation of vapours in confined spaces.
  • Allow sufficient drying time between coats.
  • EVERBUILD 901 BLACK BITUMEN PAINT may bleed through any paints subsequently applied over it. Apply a primer recommended by the paint manufacturer before overpainting.
Brands

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Everbuild 901 ‘Black Jack’ Black Bitumen Paint – Pallet Deals and Bulk Buy”

There are no reviews yet.