Everbuild 506 Contractors PVA – Pallet Deals and Bulk Buy

Everbuild 506 Contractors PVA extended information

EVERBUILD® 506 Contractors PVA is a multi-purpose agent, primer sealer, cement filler and plaster admixture that adheres to most common building and D.I.Y. materials except PVC and rubber. Ideal for priming unsound surfaces prior to plastering or paintine, as an adhesive on wood, cork, textiles and most applications where at least one surface is porous, for general dust sealing on flaking paintwork/walls etc. and as a cement admixture.

Areas of Use

• As a general purpose adhesive for wood, cork, paper, textiles etc.
• As an admixture for mortar/screeds/renders
• As a bonding agent for screeds/renders to difficult substrates.
• As a primer/sealer in tiling applications.
• As an internal filler when mixed with wood shavings, plaster etc.

Characteristics / Advantages

• Improves adhesion to most common building surfaces.
• Improves flexibility of mortars and screeds.

Everbuild 506 Contractors PVA product information

EVERBUILD 506 CONTRACTORS PVA APPLICATION INSTRUCTIONS

SUBSTRATE QUALITY / PRE-TREATMENT

All surfaces must be clean, dry and free from grease.

APPLICATION METHOD / TOOLS

FOR GENERAL PRIMING: Dilute 4 parts water to 1 part EVERBUILD® 506 Contractors PVA and apply by brush.
Allow to dry.

FOR A BONDING COAT: Use neat and apply by brush, apply plaster or render while still tacky.

AS AN ADHESIVE: Use undiluted. Coat each face and press surfaces together. Large areas should be clamped for 24 hours.

AS A CEMENT ADMIXTURE: Add 10 to 15 litres EVER BUILD® 506 Contractors PVA to 50 kg cement.

AS A FILLER/PLASTER ADMIXTURE: Dilute 1 to 1 with water and add to mix in place of water.

EVERBUILD® 506 Contractors PVA – CLEANING OF TOOLS

Clean tools and any excess EVERBUILD® 506 Contractors PVA with clean, cold water.

LIMITATIONS

Do not use in exterior applications or in areas subject to constant damp. In these areas use Everbuild 503 SBR Bond. As the manufacturer cannot know all the uses its products may be put to, it is the user’s responsibility to determine suitability of use. If in doubt, please contact Technical Services department for advice