All Our Landscaping Supplies Deals Come With ** FREE DELIVERY **
,

Everbuild 203 Accelerator & Frostproofer – Pallet Deals and Bulk Buy


Everbuild 203 Accelerator & Frostproofer

Liquid admixture for accelerated setting and hardening time of concrete and mortar

Accelerator & Frostproofer is a liquid additive formulated to accelerate setting and hardening times of mortar, concretes, screeds and rendering to provide frost protection during the setting period.

Effective even in sub-zero temperatures and can also be used in normal temperatures where a rapid set is required and as a plugging admixture.

  • Accelerator cement setting time & provides frost protection in low temperatures
  • For concrete, mortars and rendering
  • Can also be used as a plugging admixture

Spotted a pallet deal cheaper than ours? We can usually beat it! 0333 344 2655 or info@bulkbuylandscaping.co.uk
~ FREE DELIVERY on Feb / Everbuild / Sika is 2 - 5 working days ~


* Needs to be part of a pallet, 1/2 or 3/4 of Sika / Everbuild / Feb to checkout

£21.95£508.40 +VAT

£21.95 +VAT
£508.40 +VAT
x

Everbuild 203 Accelerator & Frostproofer extended information

EVERBUILD 203 Accelerator & Frostproofer is a liquid additive formulated to accelerate setting and hardening times of mortar, concretes, screeds and rendering to provide frost protection during the setting period.

Effective even in sub-zero temperatures and can also be used in normal temperatures where a rapid set is required and as a plugging admixture.

USES

  • Mortars
  • Floor screeds
  • External/Internal cement based rendering
  • Concrete (not structural)
  • Suitable for use as an emergency repair plugging aid when mixed neat with cement

CHARACTERISTICS / ADVANTAGES

  • Faster finishing times even in cold weather
  • Provides frost protection down to -8°C in wet mortar
  • <0.1% Chloride ion, non corrosive formula
  • Optimises mould usage

Everbuild 203 Accelerator & Frostproofer product information

Packaging5ltr and 25ltr jerry can
Appearance / ColourClear liquid
Shelf Life36 months from date of manufacture in original unopened containers.
Storage ConditionsStore in dry conditions away from direct sunlight between 5°C and 40°C.
Protect from frost.
Densityca. 1.2g/cm3
pH-Value9-11

Everbuild 203 Accelerator & Frostproofer application information

Recommended DosageAs a frostproofer:
Ambient temperatures down to -4°C: 2.5Ltrs per 50Kg cement

Ambient temperatures down to -8°C: 5Ltrs per 50Kg cement
Drying timeThe following is an indication of setting times at 20°C (use as a guide only)
UseMix DesignAddition Rate / 50kg CementSetting Time (Approx)
Plugging AidNeat Fresh OPC-2 - 3 minutes
Concrete1:2:42.5ltr
5ltr
7 Hours
2.5 hours
Floor Screeds1:32.5ltr
5ltr
6 hours
2 hours

APPLICATION INSTRUCTIONS

SUBSTRATE QUALITY / PRE-TREATMENT

Work should be carried out in accordance with the methods outlined in the Code of Practice BS5628 Part 3 for protection and use of mortars at low temperatures. All materials used must be free from ice and the temperature of the mix prior to placing must not be less than 4°C.

Everbuild 203 Accelerator & Frostproofer APPLICATION METHOD / TOOLS

AS AN ACCELERATOR: Add to gauging water at a rate of 2.5 to 5 litres per 50kg cement depending on the degree of acceleration required. Note: remember to reduce required quantity of water accordingly.

AS A FROSTPROOFER: Add to gauging water at a rate of use 2.5ltrs/50kg cement for protection down to

  • 4°C and 5ltrs/50kg cement for protection down to
  • 8°C, again, reducing required quantity of water accordingly.

AS A PLUGGING AID: Mix neat with fresh cement and place immediately.

Note: Concrete must be covered after placing until the minimum strength is obtained or until the temperature rises above freezing. Do not use with high alumina cement.

Brands

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Everbuild 203 Accelerator & Frostproofer – Pallet Deals and Bulk Buy”

There are no reviews yet.