All Our Landscaping Supplies Deals Come With ** FREE DELIVERY **
, ,

Everbuild 201 Admix Mortar – Bulk Buy


Everbuild 201 Admix Mortar

AIR ENTRAINING PLASTICISER FOR BRICK LAYING & PLASTERING MORTARS

Everbuild 201 Mortar Admix is an air entraining plasticiser that replaces lime in the mix to provide an easy to work “butter like” consistency to the mortar and to prevent shrinkage, cracking and crazing during the setting process. For use in brick laying and plastering mortars.

Provides a degree of frost resistance and long term resistance to freeze-thaw cycles when set.

The admix improves workability and freeze/thaw resistance in brick laying mortars, reduces the need for lime and smoothes out variations between separate batches of sand and cement.

Spotted a pallet deal cheaper than ours? We can usually beat it! 0333 344 2655 or info@bulkbuylandscaping.co.uk
~ FREE DELIVERY on Feb / Everbuild / Sika is 2 - 5 working days ~


* Needs to be part of a pallet, 1/2 or 3/4 of Sika / Everbuild / Feb to checkout

£13.99£349.90 +VAT

£13.99 +VAT
£349.90 +VAT
x

Everbuild 201 Admix Mortar extended information

USES

  • Load bearing brickwork
  • Block laying
  • External/Internal rendering
  • Pointing/repointing brickwork.

CHARACTERISTICS / ADVANTAGES

Out-performs traditional Vinsol Resin Based plasticisers (see specific data).

  • Contains a special additive which keeps air in the mix longer than most other competitive admixtures.
  • Improves trowelability
  • Easier tamping down and alignment
  • Improves workability
  • Provides resistance to freeze/thaw cycling down to 20C in both wet and dry mortar.
  • Chloride ion content <0 1%
  • Reduces bleeding.
  • Replaces lime in mix, hence reduces possibility of lime bloom and efflorescence.

Everbuild 201 Admix Mortar characteristics and advantages

Conforms to BSEN934- Part 3 (2009).

Extra tests were carried out in over and above those required by BS4887, to simulate more effectively actual performance requirements in site conditions. One such comparative test is shown below, which simulates the actual loss of air form a mortar mix due to vibration when transferred to site.

Freezing Point-100C
UsageUsing at an addition rate
of 125 - 250cm3 per 50kg
cement
Vol Air Entrained14 - 20%
Loss After 1 Hr StandingNot reduced by more
than 3% from vol. air entrained
Loss After Extra 15 Mins MixingNot reduced by more than 5% from vol. air entrained

Everbuild 201 Admix Mortar approvals and standards

% Air Content After Mixing
for..
% Air Content After 1 Hour
Simulated Work Test
Blank5 Mins: 2.92 l
15 Mins: 2.68 |
(0.24 loss)
Not Tested I -
Vinsol Resin5 Mins: 16.75 I
15 Mins: 17.84 I
(1.09 Increase)
14.01 | 3 83 Decrease
Everbuild M.A5 Mins: 17.10 I
15 Mins: 19.31 |
(2.21 Increase)
16.23 | 3.01 Decrease
Comp. Prod5 Mins• 16.20 I
15 Mins: 17.13. |
(0.93 increase)
0.93 | 7.35 Decrease

Everbuild 201 Admix Mortar product information

Packaging5Ltr and 25Ltr Jerry Can
200ltr Drum
Appearance / ColourDark brown/red liquid with characteristic odour.
Shelf LifeUp to 2 years in unopened containers.
Storage ConditionsStore in original unopened containers between 5°C and 40°C.
Density0.98-1.02 g/cm3
pH-Value11.5 - 13.5
Conventional Dry Material Content3.6 - 4.4%
Total Chloride on Content<0.1%

APPLICATION INSTRUCTIONS

Mixing

In all cases, add to mix at an addition rate of 150ml to 250ml per 50kg cement, depending on the degree of plasticising/entrainment required. Note: remember to reduce required quantity of water accordingly. One litre of EVERBUILD® 201 Mortar Admix added to a 200ltr drum of gauging water will be sufficient for gauging approx. 4 x 50kg cement for mortar or render mixes. Whilst overdosing should be avoided, this formulation does safeguard against moderate overdosing. (up to double the maximum rate).
The following are examples of modified mix designs.

1: 0.25:3 cement: lime : sand
use 1: 3 cement : sand + EVERBUILD® 201 Mortar Admix

1:1:6 cement : lime : sand.
use 1: 6 cement : sand + EVERBUILD® 201 Mortar Admix

BRICKLAYING/POINTING: Use a mix design appropriate to brick strength (1 : 3 to 1: 6).
INTERNAL RENDERS:1 : 6 + EVERBUILD® 201 Mortar Admix
EXTERNAL RENDERS: 1 :3 + EVERBUILD® 201 Mortar Admix

LIMITATIONS

  • Do not use in structural concrete.
  • Do not overdose.
  • Do not mix with other additives in same gauging water.
  • Do not use in lime based mixes.
Brands

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Everbuild 201 Admix Mortar – Bulk Buy”

There are no reviews yet.