Box 4 x 5L Everbuild 201 Admix Mortar *

RonaScreed FastDry Prompt

Fast drying additive for sand and cement screeds

RonaScreed FastDry Prompt screeding additive for site batched screeds is used to quickly reduce the level of retained moisture within the screed allowing floor coverings to be laid over the screed much sooner than with conventional screeds. It gains strength quickly, permitting early access by following trades.

It is supplied in concentrated form and used in low dilution. It promotes rapid drying and early laying of floor coverings such as sheet vinyl, tiles and other non pervious floor coverings.

Drying of screeds incorporating RonaScreed FastDry Prompt is influenced by heat generated during curing, meaning drying of thicker screeds is faster per millimetre of screed thickness. Screeds installed at 50mm can accept moisture sensitive floor coverings after only 4 days, 75mm and 100mm screeds can accept the same coverings after only 6 days.

RonaScreed FastDry Prompt is typically incorporated within 25mm to 100mm thick floor screeds and applied by competent screeding contractors. It is simple and straightforward to use and can be purchased and laid by non-licensed screeding contractors.

• 50mm screeds can be covered after 4 days
• 75mm screeds can be covered after 6 days
• 100mm screeds can be covered after 6 days
• Commissioning of underfloor heating can commence after 2 days
• Open to foot traffic and trades next day
• Reduces on site delays
• Rapid early strength development
• No license required
• Unit size: RonaScreed FastDry Prompt is supplied in 20, 210 and 1000 litre units